Dear Proctor surf company,

I am a 6’4″, 205 pound surfer out of Danielsville, GA

I am looking for a board that can support my height and weight but wont give up its maneuverability.

I’ve been looking at the Greased Pig 2, the reviews say its good for small waves which is mainly the only stuff I surf.  Basically I’m looking for a manuverable board for small wave conditions (2-3ft) that can support my frame and will allow me to get some turns in.  Any suggestions?

Sincerely, Joseph

Hi Joseph,

Yea the Greased Pig II is exactly what you are looking for…..high performance and maneuvable with incredible speed in small waves….it also
holds in good too at top speed. Typical dimensions for your build (if you get to surf a lot and are at least intermediate) would be 6’2” x 19 ¾” – 20” x 2 5/8”. It is available in either a single wing swallowtail, or a wide hip-squashtail.

I also make another board that might work even better for you specifically for the 2-3 foot zone that you are most in….the board is “Da Monsta”. This one you could actually ride about an inch shorter and a little wider: 6’1” x 20 ¼” x 2 5/8 +” .

If you let me know how long you’ve been surfing, how often you surf, you age, what basic design and dimensions of the board you typically ride (or are coming off of)…..then I can check up to see if indeed these dims I gave you are spot on. It’s kind of only a little bit of information you initially gave me that I’m going off of, but if I need to adjust at all based on your additional info….I will get ya the exacts of what I think will be the magic board to take your surfing to the next level.

Please feel free to ask any other questions you may have. I know you would
be stoked on a magic Proctor. Looking forward to your reply,
Aloha,

Todd

Todd,

Dude, first of all thank you for replying to my email, I didn’t think that any would. So, thank you very much!

Now on to the board. I was on your website and looked at the model for “Da Monsta”, I really like the way that one sounds and the possibilities it has. I’ve been surfing since I was 11. Unfortunately for me I live in Georgia, in the middle of the woods. No surf here.

The main break I go to is Sebastian Inlet, Florida.

I also make trips to Folly Beach, South Carolina and Atlantic Beach, North Carolina.

Since I’m a full time student and also a basketball player, I don’t get to go to often during the year. I mainly go during the summer months, this summer particularly I will be spending more time in South Carolina.

This is why I’m looking for a gnarly, small wave board.

I am 20 years old, intermediate sufer, the board I mainly ride is called The Spoiler by Oceanside, 6’9″ x 21 1/4″ x 7 7/8″. This board is just about right for the conditions I’m usually in. But “Da Monster” sounds just like what I’m looking for. If there is any other info that you need from me just let me know. Again, thank you for working with me!

Sincerely, Joey

Hi Joey,

Ok, that extra info helps a lot, now I know exactly what you should run with:

[fancy_box]

Monsta 6’6″ x 20 1/2″ x 2 3/4″….just a touch more board for what you are coming off, this will make a smoother transition, but still feel like you’re on a skateboard and just let out of jail.

[/fancy_box]

I can write up the details on an order form and send all the details over to you via e-mail….? We can ship direct to you door also, but we would need to know your address to get an exact quote. Do you want to go with a poly board (standard foam and fiberglass) $625.00 includes fin system and fins, or our Proxy custom epoxy (high grade composite 5 times stronger than a poly) $785.00 inc. fin system and fins? I recommend going with either f.c.s. or futures fin system.

Please feel free to ask any other questions you may have. I now you’ll be frothing on a Monsta. Feel free to call into the factory showroom at (805) 658-7659 if you would like to speak with me directly. Charissa answers the phone here, so if you do call, just let her know that we have been communicating already though e-mail and that you are ready to order a board, and that I said it is ok to get me. She will come and get me from shaping that way….otherwise, you’ll get barred and have to make an appointment.

Looking forward to your reply,
Aloha,
Todd

Awesome.

I got the invoice and everything. Thank you for your service. I’m super stoked about getting out on the board and exploring what it can do.

Hey there,

[fancy_box]I’m looking for a model for small and powerless waves that we have in the Mediterranean sea. I need speed to past powerless section.[/fancy_box]

Hi Eric,

I recommend a 5’8″ x 19 1/4″ x 2 5/16″ Scarecrow.

I have a board with these exact same dimensions and it is my favorite board.

http://www.proctorsurf.com/Surf-Boards/scarecrow

Forever Grom Explains da Monsta from Proctor Surfboards on Vimeo.

Hey guys,

I’m trying to get a recommendation on which board and appropriate specs I need.

I’m 6’1, 182lbs.  Intermediate to Advanced surfer.

[pullquote_right]I’m 6’1, 182lbs.  Intermediate to Advanced surfer.[/pullquote_right]

I’m looking for a board to ride in San Diego in small to head high surf (beach and reef breaks).

I have my performance short board from you already so I’m looking for a hybrid or all-arounder.

I want it to get into waves easily, have forgiveness in the turns, and perform a little more like a shortboard than a fish (I have a fish).

[fancy_box]Bottom line is I want it to generate a lot of speed in and out of turns even when the waves aren’t very energetic.  My biggest issue when I surf is getting bogged down through my turns and catching rails.  Learning to surf better is my goal, but the right equipment in the right conditions will help.  [/fancy_box]

I’ve been primarily looking at a couple boards in Da Monsta series.  I think I definitely want a good Quad option (5fin), but am interested to get a recommendation from you given the above information.

Please reply to all so I get your response at my yahoo account too.

God bless,

Jonathan

Hi Jonathan,

God bless you too!!

Ok, well I pulled your last order card and board file to check out what we did for the performance shortboard…..and going off that for something that has more pickup and drive in the smaller/ mushier realm,

you are on the right track with Da Monsta….which is also a very versatile board that will not make you feel the drawbacks of a fish, but will give you the benefit of extra speed with maneuverability and hold.

I recommend dropping it down to the 6’0” / 6’1” range x 19 ½” x 2 ½” with a fuller rail than the G-4…..so the deck foil ends up being flatter and the rail volume bumps up to what would feel like a standard 2 5/8” rail….for more pushback through turns so you don’t ever feel like your bogging through the flat sections.

The five fin option is an excellent upgrade so you can go tri or quad depending on the conditions….definately recommend that as well. Quads go real quick down the line and arc out nice carving turns with speed to burn through the second half of the turn…perfect for points or drawn out beachbreaks. The trifins like to pivot tighter and go straight up and snap in the pocket easier….so if you’re in real bowly waves, or tight, cornery beachbreaks, then the trifin setup will still be you go to.

Well, I hope that helped to answer some of your questions. I know you would be stoked on a Monsta five finner. Please feel free to ask any other questions you may have. Looking forward to your reply,

Aloha,

Todd

Todd,
Thanks for getting back to me!

I like the idea of a 5 fin Monsta. Quick question before moving forward with a quote.

[fancy_box]What is the major difference between the Monsta and the El Pavote.[/fancy_box]

Its hard to tell not having seen them in person. Thanks.
GB,
JM

Hi Jonathan,

The Pavote has a flatter rocker throughout, a fuller outline, and fuller rails than the Monsta. The Pavote is primarily made as a super small scale waves board…..more of a specialty board for the really tiny/ mushy conditions – and it goes crazy in those kind of waves, but due to it’s extremely low rocker, it is not a very versatile board at beachbreaks with any steepness to them; expecially if it is steep and cornery….the flatter rocker that works so well when the waves are slopey/ mushy can tend to get hung up in the lip of short, hollow waves.

But don’t get me wrong, I had a Pavote that I rode for a year straight and couldn’t get off it…..but I was surfing a lot of pointbreaks that year also….

the Pavote does love pointbreaks

and can handle a wider variety of size and hollowness if it’s a point due to the down-the-line nature of pointbreak surfing.

Anyway, my Pavote “year of ecstasy” experience led into the development of the Monsta…..to have a board with the small wave speed attributes of the Pavote,

but with more versatility so I could ride it in a larger variety of conditions.

[pullquote_right]And right from the get-go the Monsta was a special board/ magic from day one. It has become the go-to board for most surfers that have jumped onto them. I think it would be that way for you too.[/pullquote_right]

And right from the get-go the Monsta was a special board/ magic from day one. It has become the go-to board for most surfers that have jumped onto them. I think it would be that way for you too.
Please let me know if that made sense?
Looking forward to your reply,

Aloha,

Todd

Jonathan’s final board choice:

Proxy Epoxy Monsta v.1.3: 6’1″ x 19 1/2″ x 2 1/2″ wide squash
with 5 fin option install

Monstas in the Proctor Board Shop

Forever Grom breaks down the Monsta

Todd,

Since moving to San Diego from the SF Bay Area about five years ago,

I have been on a quest to find a small wave board

for average everyday surf.

I’ve experimented with everything from groveler type boards to modernized fish types and have not been able to find that magic shape that I can ride in area reef and beach breaks when the surf is small and mushy to somewhat punchy/decent in the knee to shoulder high range.

Complicating matters is that I’m a 40 yr old 200 lb guy.

However, I’m in good shape and surf 2-3 times a week.

My current small wave board is a quad fish (6’0” x 21” x 2.4”) with a concave deck, fairly pulled in tail and volume moved out towards the rails. It works well in mushy surf of any size up to head high, but struggles in the more punchy stuff with setting that fat rail and vertical turning in the pocket.

I love the down the line speed of the fish,

but want to be able to do short board moves in small surf.

I’m thinking I want more of a groveler type and am interested in your Greased Pig but also very curious about the Apache. My regular short board is a 6’6” x 19.5” x 2.65” swallow tail. I really won’t pull that board out unless it is head high and good and is mainly a Blacks board. If the surf surpasses the 8’ mark I have a 6’8” step-up for that. I’m trying to maintain a three board quiver and that small board is going to be a primary ride workhorse, so I need something that is pretty versatile. My style is pretty heavy footed and I use the rail a lot for turns. What do you suggest?

John

Hi John,

I think you’re spot on the right track and have done your homework super good.

The Greased Pig is what you’re looking for…..

super quick board, but with the hold and

maneuverability of a performance shortboard.

I would go 6’2′ – 6’4″ x 20″ x 2 5/8″+.

For heavy footed powerful guys

I make the concaves slightly heavier…..

this gives the board  nice positive hold when you push hard on it, it pushed back with positive speed this way. The Greased Pig surfs quick in the pocket and will keep things way more vertical than a typical fish or grovely kind of board.
The Apache is rad too, but for you I think you will gain more of the vertical thing and a more versatile board for you area of waves than with the Apache who’s fuller nose can get a little touchy sometimes when you wanna through right in the hook….the Apache’s best qualities are at the pointbreak setups.
Please feel free to ask any other questions you may have. I know you would be frothin’ on a Greased Pig.
Looking forward to your reply,
aloha,

Todd

Todd,

Thanks for your response. The Greased Pig sounds like what I’m looking for.

The Greased Pig

What type of board would Todd recommend for a beach break type of wave that is really short and pretty weak?

Looking for something that can generate speed very quickly as the wave doesn’t give you much time to build speed.

Ok, this is where one of those new designs I was talking about would go insane…..

cause I realize everybody almost everywhere has conditions like what you describe…so that’s why I designed the “Monsta”: you ride this board a couple inches longer than a Rascal, about 1/4″ narrower and right around the same volume maybe just a hair less on the rail volume. I’m using the same basic rail line rocker as the Rascal II, but have dug out all the spiral vee through the back third of the board and run instead an even single concave throughout the entire bottom of the board with inset double concaves through the back 1/3 of the board and through the fins….there is even a slight concave running right off the tailblock. This gives the board a wide open sweet spot, a lot of quick get up and go right off the bat, and also gives the board really positive hold through more critical, vertical turns in the pocket. The outline is changed up to more of a full outlined shortboard as opposed to a roundnosed front end. I think you could go 5’7″ x 19″ x 2 1/4″ Monsta with a winged diamond tail or a wide hip squash. Don’t need channels with this new hull contour, but the five fin is still sick for it.

My friend is interested in a board too…he’s a big dude though…5’11 220 lbs.

He rides a Boardworks Epoxy Hynson Fish 6’6 x 21” 7/8 x 2” 3/4 — has Todd made boards for big guys?

I make tons of boards for bigger guys actually….

since many stock boards in shops don’t have what is right for a lot of these guys, I am able to give them something that is the right volume, yet still a board they can rip on….and not just a big plug. I think he would be stoked on a Monsta also. I think he could drop it down a bit, but keep the thickness up…..like 6’3″ x 21 1/2″ x 2 7/8″ with a winged diamond or a wide hip squash.  Five fin setup is good too. I’ll have Charissa send you a picture of what I’m talking about tomorrow. I’ve got a bunch of them going right now for guys around here they are starting to take off. Please let me know your thoughts when you’ve received the new pics of the Monsta. BTW….this is my current favorite board and I’ve been riding it in everything unless it’s way overhead…Ok well hope that helps. Talk to you soon, and thanks again for the killer review,

Aloha,

Todd

Thanks, Neal   -Surfboard Shack

Last Board:Custom Proxy Epoxy Rascal II5’5″ x 19 1/4″ x 2 1/4″ moontail
5 fin install/ parabolic channels

Hey Todd, thanks for the detailed insight…haven’t met too many shaperswilling to provide so much detail and explanation.

Hope you don’t mind but I had a few questions. What is the difference

in performance between the rascal 2 and monsta?

How does the monsta compare to the other rascal variations like the

falcon or el pavote?

Also, how does the monsta perform compared to your small wave

grovelers eg greased pig &  Module?

Can’t wait to see photos of the monsta! I’ll show my buddy when I get

them. Thanks!

Neal

Hey Todd.

I am particularly interested in possibly

your lil’rascal shape.

I am in pretty good shape,

but want really good float for smaller waves.

Just something small that can fit the face

of a smaller wave and something to just have

a blast on-however, I really want buoyancy as well.

Hi Timmy,

Hi Todd,

Well, my home break is Wrightsville Beach, NC.

It is all beach break here where I surf.

We get quite a bit of mushy type waves

without alot of push, but do get days mixed in

where there is a little more punch to the waves.

I am a back foot surfer by nature as well.

Is the Lacerator the same board as the Superbank

or is it tweaked like a newer version.

I’m wanting to put together a quiver of solely your boards and Im going to start with 8.

I just needed some clarification on the Lacerator. Thank you for your time.

Hayden Gaddis

Hi Hayden,

Nice to meet you.

Yea, the Lacerator is an updated superbank.

I have dropped a bit of the entry rocker from the original Superbank design, but have kept the mid through the tail rocker the same and kept the same hull contours (single to inset doubles).

This gives the Lacerator a bit more versatility

getting into waves earlier, quicker through the flat spots,

but without sacrificing any responsiveness in the pocket….where it’s home is.

Please feel free to ask any other questions you may have. I know you would be stoked on a quiver of custom Proctors.

Looking forward to working with you,

Aloha,

Todd

VISIT THE LACERATOR PAGE TO SEE A 360 DEGREE VIEW OF THIS BOARD & MORE

First Name

JUSTIN

Age

28

Height

6ft 1in

Weight

200lbs

Experience

surfed growing up at outer banks of NC from age 10 to 17, moved inland have not surfed since. Joined army at age 24. now when not deployed I live in Tacoma WA. Located close (driving distance) to westport jetty in wa. I want to get back into it. I know it will come back when I get on the board. I am in good shape. I am a Special Forces Combat Diver. I know I can paddle and fight breakers. But I need a little stability to help me get back into the groove.

Type of board you’re interested in

funboard
Type of waves you will be surfing with this board
westport wa average 6ft.

The direction you want to go with your surfing

As good as I can get. Will travel to Ca to catch waves when I can

What boards are you currently riding?

Started with a body board till my mother decided i was old enough to ride a surfboard. Always had short boards never ridden a long board. Currently Have a 6ft 2in board that I have not ridden in years.

Hi Justin,

Sorry to not get back with you sooner….been really busy here….anyway, I checked out all your info you submitted and

I know the perfect dimensions for your

Funshape: 7’2” – 7’6” x 20 ½” x 2 ¾”

with a rounded squashtail.

If you go with the shorter length, you will get more performance and responsiveness, but will lose a bit of paddleability and stability. If you go with the longer dims, then you’ll get more stability and paddleability and may sacrifice just a little performance on the smaller scale days.

The Funshape design will give you the

paddleability and stability necessary to get

you back on track without frustrating you.

This is still a full on performance oriented board that will challenge you, but without the frustration of riding a shortboard that is too small. The Funshape will also allow you to progress without the need of switching to a different shape. Basically, in time, you will be able to surf this like a high performance shortboard design, but with some added stability and paddleability.
Ok, so fins I would go with are the Futures fin system…they are the strongest and I feel best for anyone over 185 since the entire base of the fin is set into the board which gives a good positive drive to the board. I would go with a tri-fin and the perfect template is the AM-2 fin since it has a good amount of base to the fin which will complement your build and translate to a quick and drivey board.
We can do the “now war arose in heaven” artwork for you too….it looks killer. That particular artwork runs $175.00 but like I said it looks sick.
Please feel free to ask any other questions you may have. I know you would be stoked on a custom Proctor Funshape.
Looking forward to your reply,
and thank you for your service to our country,
Aloha,

Todd

Todd

Thanx for getting back to me.

How bout 7′ 4″ x 20 1/2″ x 2 3/4″ for size.

I appreciate all the sound information. I will take the fin set up you suggested and the art work. I am also wondering about a rear grip pad and a leash, if you have suggestions concerning those. Also ? on total price, how long do you need to have everything done by March, and how much down for you to start the work. I was working in the philippine ocean the other day and day dreaming about this board can’t wait man thanx for all the help.

Justin

http://www.proctorsurf.com/Surf-Boards/Funshape

See what’s in Stock

Hey Todd,

I ordered a custom 6’2 G4-E from you about half a year go or so and I half to say I am greatly impressed…

I have put the board through hell being that I am new to surfing and this was my fist board that wasn’t borrowed..

My surfing has progressed really fast and I have been thinking about getting another board from you for waves chest high and below… I moved to okinawa and I am surfing reef breaks.

I would like a board that can catch

pretty much anything, is loose, and fast.

I learn quick so don’t worry too much about my experience. I remember when I first got my board from you and everyone says dude that board is going to be way to hard for you to learn on and how it would be to fast for me.. The first wave I went for was about waist high and choppy and I caught it..

I fell in love with that board instantly..

Although the board has been through 2-3 foot VA mush to overhead hurricane bill swell in OBX to waist-head high hollow Okinawa reef breaks, I would like to have something a little more loose and fast on the smaller waves..

I also want to try out your polyproxy

construction this time as well.

What do you think about a quad? I wont be ready to order for a couple months but I am serious about getting this board.

I also have a friend who

loves how strong my board is and

how few pressure dings it has in it

and is getting a board from you when I get mine.. All I have is good things to tell people about your board and service.. Thanks allot for jumpstarting my surfing and I look forward to getting new boards from you in the future and spreading your name. Just let me know what you have in mind for me.

Take care,
Vaughn

Hi Vaughn,

Good to hear from you and stoked the board has gone so well for you….and in so many conditions….yew.

So here’s a few choices to choose from as to what I have in mind for the next magic board for smaller, mushier stuff to speed on:

Either the Greased Pig, the Greased Rascal,

The Rascal II or the Falcon….

one of these would be the board for you.

Each of them are made for performance

surfing in the weaker stuff.

They all generate incredible speed without having to rely on the wave to generate it for them. I recommend checking out the website to read a breakdown on each one….from there one of them will strike you as “the one”….that is the one to go with.  As far as dimensions go, what is your current height and weight. I can break down the ideal dimensions once I receive that info. If you have any questions regarding the different boards I listed above, please don’t hesitate to ask so I can give you any further explanation.

Ok, well speak soon,

Aloha,

Todd

http://www.proctorsurf.com/Surf-Boards/worldwide-custom

Hey Todd

I was checking out the greased pig on your site.

I was looking for a new everyday board

for waist to head high + .

as far as size I was thinking 5’10” x 19.5” x 2 3/8” .   My only question would be single or double bump in the tail and whether I should go thruster or quad.   If I was going to go with four fins I figured it would work better with the wider tail or single wing.  I dont like four fins on real pulled in tails.

At the same time I wanted something

that will pivot off the bottom and

be able to go vertical

where I’ve rode quads that have trouble doing that. Any suggestions.

Mike

Hi Mike,

Good to hear from you.

The Greased Pig is a great board and one of my favorites.

It jams in small waves and gives you the speed

to do all the turns and maneuvers that you

can’t normally do on a regular board

in those same conditions.

Also, what is very cool is that it is really versatile for a small wave board in that it will surf up to head high + and still run clean.

This board goes quick and loose

(like a quad) already

without the need to loosen it up more as a four fin….I find the tri fin is my favorite since it does more of exactly what you mention…..holds and pivots vertical and lets you lay into it in tight, snappy turns.

I have been having people get them with five fin (boxes) set-up so it can be ridden as a trifin or quad…..and that works really well and gives you the opportunity to enjoy the best of both worlds.  What is your current height and weight, so I can crosscheck that with your suggested dimensions.

The tail is pretty wide already on the

Greased Pig

so I don’t recommend going wider…..

it works great for both tri or quad as it is.

Please feel free to ask any other questions you may have. I know you would be stoked on a magic Greased Pig.

Looking forward to your reply,

Aloha,

Todd

http://www.proctorsurf.com/Surf-Boards/Greased-Pig