I am particularly interested in possibly

your lil’rascal shape.

I am in pretty good shape,

but want really good float for smaller waves.

Just something small that can fit the face

of a smaller wave and something to just have

a blast on-however, I really want buoyancy as well.

Hi Timmy,

Hi Todd,

Well, my home break is Wrightsville Beach, NC.

It is all beach break here where I surf.

We get quite a bit of mushy type waves

without alot of push, but do get days mixed in

where there is a little more punch to the waves.

I am a back foot surfer by nature as well.

I ordered a custom 6’2 G4-E from you about half a year go or so and I half to say I am greatly impressed…

I have put the board through hell being that I am new to surfing and this was my fist board that wasn’t borrowed..

My surfing has progressed really fast and I have been thinking about getting another board from you for waves chest high and below… I moved to okinawa and I am surfing reef breaks.

I would like a board that can catch

pretty much anything, is loose, and fast.

I learn quick so don’t worry too much about my experience. I remember when I first got my board from you and everyone says dude that board is going to be way to hard for you to learn on and how it would be to fast for me.. The first wave I went for was about waist high and choppy and I caught it..

I fell in love with that board instantly..

Although the board has been through 2-3 foot VA mush to overhead hurricane bill swell in OBX to waist-head high hollow Okinawa reef breaks, I would like to have something a little more loose and fast on the smaller waves..

I also want to try out your polyproxy

construction this time as well.

What do you think about a quad? I wont be ready to order for a couple months but I am serious about getting this board.

I also have a friend who

loves how strong my board is and

how few pressure dings it has in it

and is getting a board from you when I get mine.. All I have is good things to tell people about your board and service.. Thanks allot for jumpstarting my surfing and I look forward to getting new boards from you in the future and spreading your name. Just let me know what you have in mind for me.

Take care,
Vaughn

Hi Vaughn,

Good to hear from you and stoked the board has gone so well for you….and in so many conditions….yew.

So here’s a few choices to choose from as to what I have in mind for the next magic board for smaller, mushier stuff to speed on:

Either the Greased Pig, the Greased Rascal,

The Rascal II or the Falcon….

one of these would be the board for you.

Each of them are made for performance

surfing in the weaker stuff.

They all generate incredible speed without having to rely on the wave to generate it for them. I recommend checking out the website to read a breakdown on each one….from there one of them will strike you as “the one”….that is the one to go with.  As far as dimensions go, what is your current height and weight. I can break down the ideal dimensions once I receive that info. If you have any questions regarding the different boards I listed above, please don’t hesitate to ask so I can give you any further explanation.

Ok, well speak soon,

Aloha,

Todd

http://www.proctorsurf.com/Surf-Boards/worldwide-custom

Hi Todd,

I see that you are designing on a NMC machine. Very interesting, what a great idea.

Me, 6ft, 165lbs, fit, 50 years old.  Started on a 9-6 Robert August, now on a 8ft- 3.5 inch thick pointing nose Infinity.  Learned at LA point breaks, Sunset, Malibu, Latigo.  Now surfing beach break at Venice and El Porto.

Looking to go shorter, more responsive,

but lets be real, I am 50, and probably a level 2 surfer.

I  would probably want it in EPS.

I am in Venice, very easy for me to drive up to Ventura.

Thanks for your time, and thanks for pushing the board technology forward,

David

Hi David,

Thanks for your e-mail; nice to meet you.

The perfect next level board for you would be

the Lil’ Rascal.

This board has the paddleability of a longer/ thicker board and carries the speed of a retro/ fish style shape down the line, but maintains the responsiveness, maneuverability and holding capacities of a modern high performance shortboard…..

it combines the best of both worlds into one versatile board.

Ideal dimensions to drop down to would be in the 7′2″ – 7′6″ x 22 1/2″ x 3 1/4″.

This board is ideal for the LA points as well as the beachbreaks of Venice and El Porto where you’re surfing.

I recommend the Proxy construction.

The Prroxy is my name for our uniquely handcrafted composite construction.  This is the highest grade board I make for both performance and strength.

The Proxy has the positive flex characteristic of anultralight polyester board,

but with three to five times the strength of a standard

polyester board…..and it is made custom (here in our

Ventura factory from start to finish) to the exact

dimensions that are going to be best for you.

The Proxy is slightly more buoyant which makes for good paddling and lively under your feet as well.
Please feel free to ask any other questions you may have.  I know you would be stoked on a magic Proctor Lil’ Rascal.
Looking forward to your reply,
Aloha,
Todd

Hi Todd,

Thank you for your long and thoughtful reply.  A few more questions for you.

Do you vent your Proxy boards to prevent delamination?

What would the cost be of the board you recommend, I am thinking a sand finish.  How long would it take to make?
Best wishes,
David

Hi Dave,

The core material I use doesn’t require venting…

as is the case with other companies that use a recycled form of eps….thermoformed/ molded technologies i.e. surftech as well as firewire and others use  a 1lb. or 1.5 lb typically. The recycled eps is a generic foam used in many different applications traditionally outside the surfboard industry, it is much cheaper, has very low compression strength as well as a high tendency to “vent” at high temperatures or at high altitudes due to the high porosity of the foam….ultimately this will cause foam shear or delamination.

Many companies that outsource their boards, those that mass produce outside the US, those who are trying to save on construction costs, or those that don’t understand the dynamics of different foams use this kind of eps foam in their boards. Then, they have to overcome the associated problems by venting their boards, poking tiny holes all over the skin of the glass job (as is the case with using a closed cell polystyrene) or some other weird thing to try to offset complications caused by using a poor core material.

Other problems associated with a poor core material is that you will be told to get immediately out of the water if you get a ding while surfing….this is  to prevent water absorption into the board core……which can only be removed by applying a vacuum system to it….a nightmare which you should not have to worry about….(and you don’t by the way with the Proxy system).

I use a non recycled or ‘virgin bead’ epoxy foam

that is made for surfboards

and specifically for use with our unique Proxy (custom flexible epoxy custom composite construction). The use of the virgin bead epoxy core foam and its part in the entire Proxy system of construction

eliminates the need for a valve or vent.

It is always advised not to keep your board consistently in extremely high temperatures for extended periods of time….and that goes for any kind of construction since it can weaken the resin-to-core-to-skin bond of the board.

A custom Proxy Rascal in your dims is $775.00 and includes fin system. fins, a two color spray and sand finish to 320 satin.  It takes approximately 3-4 weeks. Please feel free to ask any other questions you may have. I know you would be stoked on a magic Proxy Rascal. Looking forward to your reply,
Aloha,

Todd

P.S. – It might be a good idea to set up a phone or walk-in appointment if you have further questions regarding the uniqueness of the Proxy system…..it is quite different than anything else out there, but also took about ten years for me to dial in this process, so breaking it down and explaining all of its nuances is much easier for me over the phone or in person…..otherwise I end up writing novels and not getting to all the boards I’ve got on my plate.

Hi Todd,

Thank you for your detailed response.

I love a good tech response.

I’ll give a ring to the shop tomorrow and we can go over all the specs and such.
Best wishes,
David

I´m based in Portugal and wondered if you had any kind of distributor that would stock the Rascal 2 in Europe?

We are not currently working with a distributor in Portugal/ Europe…we have been shipping direct worldwide for over ten years though….so the best way to go about ordering a Rascal is straight from Proctor….straight from us…

I´m really interested in getting a pretty versatile board. As a surf instructor and manager at www.surfexperience.com I really just want to take one board to the beach for general conditions.

The Rascal 2 would fit the bill for the

average day down here in the Algarve, Portugal.

I´m currently riding a Bufo MK 6´2 19 1/4 x 2 1/4   hydroflex board which I´ve quaded up myself. I really love the positive flex characteristics for 2′ plus days, anything smaller and it´s the mini-fish by webber. that ones 5´9, goes like a dream but generally gets over powered in anything with a bit more push. I´m riding it with a trailer fin for extra bite as I´m very heavy on the backfoot.

I´m about to create a standalone review site on boards and the different technologies available. I´ve been testing firewires, Bufo´s, Seaflex (quiver shortboards), surftechs TL2´s and Tuflites, Placebo´s Uber Fish in flexlite, XTR and finally SLX by Webber. It´d be great to do a review on the Technology your working on too. I´ve been following it for a while now but never seen any of your boards this side of the pond.

We are doing something very unique that gives you an excellent flex characteristic combined with the strength of a molded board….but completely custom…..over half of my production is the Proxy construction boards now with word of mouth adding to that percentage overshadowing the amount of poly boards we do.

I´ve been speaking to a guy down here called Uwa who´s been working on Bamboo laminate boards. He speaks very highly of your designs and technology. He told me all about the Lil Rascal.

That’s really cool…thanks.

After checkin it all out I reckon the Lil Rascal 2 would be the one for me due to it having a little more bite.

It has the speed of a retro style fish with the maneuverability, responsiveness and holding capacity of a modern high performance shortboard.

What dimensions would you recommend for the Lil Rascal 2 –

let me know your height and weight and I’ll cross that up with the dimensions/ designs you listed above of your other boards… to get you the exact dims that would be best for you for a Rascal II,

also how much would it be in the Titanium 2 proxy technology?

The Titaniums run $900.00

The final question is how much is it to ship and with import tax too?

I don’t know what your countries import tax is….you might be better off checking that out from your side of things based on the amount of the board.

I´m really keen to get hold of one of these somehow.

If you are interested in ordering a custom Rascal, then let me know your shipping address, and I’ll have my wife Charissa get back to you with a quote for packing/ shipping. We send boards all over Europe, but each destination is different in regards to the shipping rate, so the only way to get you an accurate quote is by having your address.

Thanks and regards

Thanks Jez….

I know you would be stoked on a magic Proctor Rascal II. Please feel free to ask any other questions you may have. Looking forward to your reply,

Aloha,
Todd

A few words to tell you how much I love the boards you made for me.
Time is going and I’m thinking of a new order for the end of summer.
So I would like to get your suggestions for 3 or 4 more new boards:

1- Going to the Mentawais in October so i’m thinking of

SR 71 or Ante up in 6’8 ( 19 3/8? 2 1/2?)
Proxy + carbon hinged flex tail?

Good dimensions….maybe could go 19 ¼” width….I recommend Ante-up…are you wanting to drop the thickness a bit on these boards as to previous one’s? Do you want to drop the rail volume also just a bit. You can get away with lower rail volume for boards for Indo since the waves are so perfect and have good push to them. I recommend round pin.

2- My favorite board is that first Proxy Lil’ Rascal you made for me

in 6’1 x 20 3/4 x 2 9/16.

She’s getting old now and I’m thinking of a new one.
Should i get the same?

That is a good solid board…I would stick with the same dimensions for sure if that one is feeling that good…
Should i try that new Lill Spuddy?Same size?

Yea, I would go with the same dimensions with the round tail/ Lil’ Spuddy model.
What is the difference between them or with the Greased Rascal?

The Greased Rascal you ride a bit longer and narrower than the original Rascals, and it has the bottom and rocker of the Greased Pig, so it is a little bit more favored to small waves with shape and will surf in bigger waves also and still ride clean. It is a great board too, but similar to the Greased Pig….so I would go with your original Rascal dimensions in round tail Lil’ Spuddy model.

3-Looking for an all around Proxy Titanium series

in 6’4 (19 1/2? 2 1/2?).

G4E? Blackbird? Accelerator? Something else?

I would go with the G-4….I have a really good design file in 6’4”. This one also has the thinner volume I noticed….do you feel like you can go a bit thinner on your boards for good waves? As you progress, typically you can start riding boards that have less volume; you just don’t want to sacrifice too much paddling, but I think you could go thinner on this batch of boards especially since they are for Indo style waves.
The Blackbird is a good one too, but it favors being ridden off the back foot. The tail and fins like to release in the lip on this board, so if that is what sounds good to you then this would be a good one to run with.
The Accelerator is a bit more of a Grovel style smaller wave board and for marginal conditions ( I have been riding mine a lot lately actually), so I don’t know that it is going to be a board that is your best bet for Indo….maybe for another order or for waves at home.
Dimensions for each of these I think you could go: 6’4” x 19 ¼” x 2 ½” rounded squash for the G-4 or Blackbird, and squash, round tail or swallowtail for the Accelerator.

4-I’m surfing 50% of the time my new Greased Pig with carbon rails.

So i’m thinking of an other one 6’4? 19 5/8? 2 9/16?

Good dimensions….can’t go wrong with the parabolics and the channels work insane of this board….been making quite a few of them lately…

Proxy,Parabolic stringer + 6 channels?

Please let me know what you think about this.I’m in total confidence with your suggestions.

Let me know your current weight because I think we can drop the volume of your boards just a bit….keeping the paddle, but gaining a bit more responsiveness and performance by making the overall volume and rail volume just a bit more sensitive…..let me know what you think of this too…? I also have a new construction method where the boards are super light….they are not quite as strong as with the 6oz. like we have been doing, but they are still amazingly strong, but very very light….so if you are interested in going a little bit lighter weight I am now offering a construction series for this also. If you are happy with the strength, weight, and performance on your boards now, then I would just stick with what has been working….maybe just try one of two of the new smaller boards with the super lightweight glassing constructiong….
Please feel free to ask any other questions you may have. I know you would be stoked on some magic Indo carpets.
Looking forward to your reply,

Todd

Best,
Vincent

Hi Todd,

nice to get your suggestions.

My current weight is 150lbs and i’m 45 years old.

I think i can go a bit thinner on my boards so i will follow you to drop the volume a bit but without missing the paddle too much.

Yes, I think we can go thinner without sacrificing paddle, but gaining performance.

My order would be:

1 Ante up 6’8/ 19 1/4 / 2 1/2

with lower rail volume,rounded pin
Proxy,carbon hinged flex tail …

do you want the futures or f.c.s. fin system for this board, and what color for the spray fade (two-tone light grey looks good or two tone light blue fade with the carbon hinge.

2 Lil’ Spuddy proxy. Stringerless with carbon rails?

I’m ready to try it smaller and thinner (6’0? 20 1/2 ?) if you want.

New dimensions sound good….do you want to go with tri fin or five fin setup? What color for the fade, and what fin system?

3 G 4E 6’4 x 19 1/4 x 2 1/2 rounded squash.

Proxy,construction?(Titanium upgrade?Parabolic?New super light glassing construction?)

I think super light glass with titanium parabolic would be sick for this one…..and in the two-tone light gray fade for the color with futures or f.c.s.?

4 Greased pig 6’4 /19 5/8/ 2 9 /16

Proxy,parabolic stringer,6 channels
super light glasing construction;

super light glassing is good with channels and parabolics….nice….two tone light blue would look nice to easily differentiate between the other greased pig. Do you want  f.c.s. or futures…..tri fin or five fin?

Does it sounds good to you?
When do yo think i should order the boards to be sure to get them in september?July?

It is getting very busy right now, so I think probably the sooner the better….at the very latest by July, better by end of May or June for me personally…..so I can take the time to do exceptional job…..I’m very excited about these new dimensions for you…..I think these boards are going to be your biggest progression in your surfing.
Please feel free to ask any other questions you may have.
Looking forward to your reply,
aloha, Todd

Best,
Vincent

Hi Todd

I will put my order by the end of may.

For each board I’m ready to drop the volume a bit to

gain peformance without sacrificing paddle.

I would like 4 new boards from you:

1- Ante Up 6’8 x 19 1/4 x 2 1/2 rounded pin Proxy,carbon hinged flex tail

Futures fins ,full camo green with no fade.
I will bring it with me to the Mentawais at the end of the year.

2- Lil’ Spuddy 6’1 x 20 1/2 x 2 9/16 stringerless with carbon rails,

fin setup,Futures fins,camo green spray.

3-Greased pig 6’4 x 19 5/8 x 2 9/16 Proxy,parabolic stringer,

6 channels,super light glassing

Full camo green,no fade.3 fin setup.
Futures fins if possible with the channels,if not FCS.

4-For the last board i think i will take another four leaf clover

because i love soo much this board.

What would you say of:

4 leaf clover  6’4 / 19 3/4 / 2 9/16 diamond tail super light glass with titanium parabolic in the two tone light gray fade
Future fins with AM2?

Please give me your advice for this final order.Do you think i should change anything?
If it’s OK for you could Charissa send me an advice around the end of May for Paypal payment?

Best,
Vincent

Age: 44

Height: 5’9″

Weight:  192 lb

Experience:  31 years

Type of board you’re interested in:  rascal II

Type of waves you will be surfing with this board

waist to head high mush to steep point/beach breaks

The direction you want to go with your surfing

more airs and freer turning and carry more speed through turns

What boards are you currently riding?

PU 6’0″x20′x2.5″ channel island Pod, PU 5’11″x20x2.5 Simon Anderson TPF3, 6’4″x19.5″x2.5″ Channel Island Flyer Epoxy.

Anything else you want Todd to know

I grew up surfing Malibu and Ventura county line and topanga but live overseas now so an email would be greatly appreciated on your recommendations of dimensions for a rascal II board order, thanks lots!! David LIu

Hi David,

Nice to meet you…

the magic Rascal II for you is going to be

5’10” x 20 1/8” x 2 ½” with a full boxy rail…..

this is the fastest high performance board I make…..

I know you would be stoked!!:) Please feel free to ask any other questions you may have.

Looking forward to your reply,

Aloha,

Todd

Hi Todd,

Thanks so much for you quickly reply, the dimensions look great. Could you please tell me how much it would cost and how long it would take and whether I can have it delivered overseas or in the States only, thanks very much again for your help.
David

Hi David,

The Rascal is $585 for a polyester and $735 for the Proxy custom Flexible Epoxy construction. Both of these constructions have various performance and durability enhancing upgrades available as well. Our turnaround time right now is about 3-6 weeks, depending on how quickly you would like to get the board. We ship direct worldwide. If you would like a shipping quote, please provide your full shipping address and we’ll let you know what the cost would be.

Please feel free to ask any other questions you may have.

Age: 34

Height: 5’8

Weight: 185

Experience: intermediate 15yrs (live inland thought)

Type of board you’re interested in:

Short board that paddles like a fun board

Type of waves you will be surfing with this board:

NJ inconsistent mush, 1-3′ summers, 4-6+ Fall, annual trip to PR or CR. So basically an all around

The direction you want to go with your surfing:

I only get out 20 times a year,, so I want to catch every wave. I ned something that is willing to hit the lip but also paddle my weight around like a speed boat.

What boards are you currently riding?

Rusty Pirahana 6’0″ 20.5 2.18 thick Surftech. (Just does not float me) Hank Warner thruster 6’6″ 20.5 wide 2.65 thick Board does not hold thickness throughout, tail it thin, nose is narrow. I was just about to order a firewire Dominator 6’4″ 21 wide and 2 5/8″. Then I can across your company in a review search. What would you recommend. Although I no longer get out as much as I did in my youth, I really like to make the most of my sessions regardless of the conditions I am faced with. I use a vasa trainer to maintain some sort of surf conditioning, I just need a board that can help fill in the gaps and float my fat ass.

Goal for consultation:

I would like to detail/order my custom surfboard with Todd

Hi Jeff,

Sorry to not get back to you sooner…just been really busy here….

Anyway, nice to meet you and I hope you had a great Easter weekend.

Regarding the magic board for you….

there are three board models that I make

that I’ve narrowed it down to for you -

The Lil Rascal,

…………                the Greased Pig,

or the Big Chief (fuller volume G-4.e).

Since there is a pretty wide range of conditions you described…

you will need a board that is going to be

versatile from small and mushy to overhead

depending on your home conditions or travel spots.

The most versatile high performance shortboard

I make is the G-4.e.

This board generates it’s own speed in small waves, yet holds in and surfs fast and tight in the pocket in the punchier stuff.

The Big Chief is a fuller volume version of the G-4.e

and will tend to favor the waist high and over, up to a couple feet overhead….it is a versatile performance shortboard. Critical for you with this board is going to be the proper volume so you get the paddle necessary since you are not able to get out there everyday….I would go 6’3” x 20 3/8” x 2 5/8” with a swallowtail for this one.

The other way you could go is a board called

the Greased Pig….this board is basically a

high performance fish/ shortboard crossbreed…

flatter rocker keeps it running fast through the flats, but it is not so flat that it can’t handle up to head high waves great too. It has more of a full outlined shortboard nose with a single wing swallowtail to keep it crisp and responsive in maneuvers. This board would work great at your home breaks as well as travel destinations up to head high and even a little over….

this board is a small wave ripping speed machine

with great paddleability.

I recommend going 6’2” x 20 5/8” x 2 5/8” with a slightly fuller rail and flatter deck than that of the Big Chief.

The last board I had in mind is called

the Lil Rascal and is the fastest

small wave performance board I make.

It can also be ridden in waves up to head high, but favors the smaller and mushier stuff. It paddles insane and never has trouble generating speed….

basically has the speed of a retro style fish with the maneuverability of a performance shortboard.

Dimensions for you would be 6’0”- 6’1” x 21” x 2 5/8” with a pretty flat deck and even a bit fuller rails than the Greased Pig.

In order for me to figure out what is going to be the ideal model for you to go with,

It makes it much easier for me to

speak with you directly,

but feel free to check out each of these board models I described above by going to

www.proctorsurf.com

and checking out the descriptions and you can watch movies about the different boards too….hopefully this will help give you an idea as to which one strikes you as the direction you want to go with your surfing….from there I can further detail  the fine tune aspects of your board.

Looking forward to your reply,

Aloha,

Todd

Very nice looking boards.  I am interested in a shorter board.

I have only surfed about 20 days

mainly on 9′+ long boards.

The short boards I have tried in the past have been simply too much for me and the small San Diego surf.

I’m a very athletic 5′-11″, 200lbs.

What size and model would you suggest?

Thanks

Court

Hi Court,

I’d be glad to help you out.

I just need to know some other info in order

to dial in the magic board for you….

What is your age, height, and weight….and the dimensions of the short boards you tried that didn’t work for you (if you know the dimensions; if you don’t that is ok and not a critical thing). Looking forward to your reply and to helping you dial into the perfect board to take your surfing to the next level,

Aloha,

Todd

Hi Todd,

Thanks for getting back so quickly.

I’m 37, 5’-11”, 200lbs, thick hockey player

body type in good athletic shape.

In the past I’ve tried shorter boards around the 7’ to 7’6” very similar to your Manatee and Mini shapes.  These were fun in Maui and Oahu with a 3’-4’ swell but I struggled catching waves in San Diego when things got small.

I like the idea of a wider, thicker board to float my big ass into the wave and then have a shorter (6’-6”?) board feeling once up and in the wave.

I guess a similar feeling as my 46” skateboard?  Being new to the sport I’m not sure if this is even possible with a board design for someone at 200lbs.

This will be my first board, and

I’d like it to be something I can enjoy

for several years in all types of conditions.

Living her in AZ I’m lucky to get 15 days a year but maybe with a killer board I might find my way west more often.  I look forward to hearing from you.  Thanks.

Court

Hi Court,

I know the perfect board for you…..the Lil’ Rascal,

but yours would be kinduva big Rascal –

6’8” x 22+ x 3”.

This board has the paddle of a longboard

with the feel under your feet like a skateboard.

The best board for catching waves on small days as well as having the versatility to ride in just about any conditions you can encounter from two foot dribblers to head high and a little over.

Check out http://www.proctorsurf.com/Surf-Boards/?page_id=830….that’s your board.

Please feel free to ask any other questions you may have. I know you would be stoked on a Lil’ (big) Rascal. Looking forward to your reply,

Aloha,

Todd

CHECK OUT THE RASCAL SERIES IN THE ONLINE SURF SHOP

I like your ideas in board construction

and I’m in the market for a new shortboard.

My info is below.  Which board would be best for me and if you think I should order a custom board, what is your opinion on the shape I would need?  Thanks in advance for your reply.

6’2
185 lbs

Heavy front footed surfer

I live in San Diego and surf all up and down the SOCAL coast.   I have been surfing for 10+ years, but am still struggling to progress.

I can do a few good turns on a wave,

but am not killing it and often catch rails.

This will be my primary shortboard and will replace a 6’3 Sharpeye (19″ wide) which rode ok, but I don’t think it fit my front footed style.

Any ideas???

God bless,
Jonathan

Hi Jonathan,

Sorry to take so long to get back to you…been very busy here…Anyway, I read through all of your info you sent through and I know the magic board for you….
First off,

the board you have now sounds like it is too small and has a rocker/ bottom curve and bottom contours that don’t suit your style i.e. front-footed.

There are a lot of front-footed surfers just like you and that is why

I designed a board that specifically caters to driving more off the front foot.

This board is called the G-4.E

and it is actually my most versatile

high performance shortboard design….

perfect too for the variety of waves we get in Cali.

The G-4 has

• a moderate entry rocker to get you into waves easily,

• a flatter fun through the middle/ under your front foot for bursts of speed down the line

• and positive carry through flat spots (non-rail digger),

• and a fair amount of tail rocker to keep it crisp and loose in turns and free in the pocket.

The single-to-double concave bottom is also a major important factor for you since this particular hull contour drives really well off the front foot.

I think you ought to be going 6’4″ – 6’5″ x 19 1/8″ x 2 1/2″ and

I think you might like a swallowtail….

helps keep the tail looser and works well

for more front-footed surfers.

I make this board in the traditional polyester construction as well as our unique Proxy/ custom flexible epoxy construction. The standard polyester is $585.00 and includes fin system and fins, while the Proxy is $735.00 and includes fin system and fins….both construction methods are made with the best materials for their perspective categories as well as using the highest craftsmanship, however, Proxy is the premium board I make for both strength and performance.
Please feel free to ask any other questions you may have. I know you would be stoked on a magic G-4.E. Looking forward to your reply,
Aloha,

Todd

Todd,

Thanks for the reply and no worries about the short delay.  I’m definitely interested in the G-4.E.  I’ll take your advice and move up to a 6’4 with the dimensions of your choosing for my height/weight/style info.  I’ve never had a swallow tail, but am willing to try it out.

This will be the shortboard I travel with

so I want it to be as strong as possible.

Therefore, I’ll go with the Proxy.

Do you recommend any of the other proxy options?  Are their any other choices I need to make before placing my order?  Thanks Todd!

Jonathan

Hi Jonathan,

Ok sounds good…I think we’ve covered all the design/ shape info pretty good…so as far as upgrades to the Proxy goes…
The standard Proxy construction is really strong as is…

there are a few upgrades you can get such as

Kevlar compression patch for an additional $85.00 -

I would recommend this if you have issues crushing in the decks of your boards really bad;

it this isn’t really a problem, then the added strength of the standard Proxy is going to work great for you.

Another option is the carbon hinge flextail f

or an additional $85.00 -

this works pretty sick since it allows me to thin the tail area out a bit giving the board a real whippy tail through turns; kind of a slingshot effect;

the carbon keeps the tail from fatiguing in that area as

well as reinforcing the toe and heal areas of the tail

from crushing in over time (good also if you have

issues with crushing in the rails in your tails).

There are also parabolic stringers which are an additional $100.00 if you want a real springy flex out of the board.
Personally, I would just go with the standard Proxy with maybe the carbon hinge in the tail…that gives you a high performance board with great strength.

The only other thing would be the color for the board.

The Proxy comes included with the price of the board a two color spray…

since you’ll be having this board around longer than a typical construction board, it keeps them from looking dingy over time….alleviates the yellowing look. Check out this link to see the various options for color that come with the board

http://www.proctorsurf.com/Surf-Boards/?page_id=238

Please feel free to ask any other questions you may have.  Once you decide on those last few things, my wife Charissa will send you the breakdown and invoice to your e-mail. You can do an e-sign with credit card or debit card for the down payment…final payment due when the board is done. Or ir you prefer to call in to the factory showroom to dial things in you can call me here at (805) 658-7659.

Looking forward to making a magic Proxy G-4.E for you,
Speak soon,

Todd

Todd,

Cool.  I will order the 6’4 with specs you’ve mentioned below.

I’ll add the carbon, but not the kevlar.

For the color I’ll go with the standard fade design with the “SKY” color.  Looking forward to it.

One of my best friends should be contacting you about a board soon, if he hasn’t already.   He just got back from another deployment in Iraq and will be giving you a call.  His name is Greg Pruett….another brother in Christ.  We went to college together and are now in the Navy.  Keep an eye out for him.

God bless,
Jonathan

Hi Jonathan,

Great…then we’ve got it dialed. Charissa will be sending over the breakdown for you. She will walk you through that part of things….it’s very simple. Do you have a preference regarding the logo placement?

I was thinking black logo up in the nose,

or running diagonal from the stringer over/

down to the rail…

lemme know…
I’ll make you a great board. Please let me know if you have any other questions along the way. We will call you and/ or e-mail you when the board is done.
Thanks brother and God bless you too

Todd

P.S. – I’ll keep an eye/ ear out for your buddy Greg..

What’s the differences between the

Falcon and the Greased Pig

as far as the way they ride and what kind of waves they’re good for?
Thanks,
Kent

Hello, sorry to not get back with you sooner….

have been very busy here. Anyway,

the Falcon is a version of my

Rascal II model with a more pointy nose.

The Falcon is exceptional in very small scale, weak waves….

very fast like a fish, but with the responsiveness of a modern board for modern performance maneuvers.

The rocker is very flat on the Falcon.

The Greased Pig also excels in small wave performance surfing.

It is a bit more versatile than the Falcon and will surf clean in up to head high waves as well as small little crumblers.

The Falcon is really a specialized design for the real small-scale crumblers…..and is best suited for making the weakest stuff a speed course and demolition of any thing even close to resembling a lip in the dismal conditions.

Hope that answers your questions. Please feel free to ask any other questions you may have. I know you would be stoked on a magic Proctor Falcon or Greased Pig.

If you let me know your height, weight, experience/ how long you’ve been surfing, the type of waves you need the board for, and the dimensions/ basic design of your current board; I will detail the best design and dimensions for you.

Aloha,

Todd

Hey Todd,

Thanks for the information, I think the Greased Pig is what I’m looking for. I’m currently riding a 5’4″ x 19.25″ x 2.1875″ Proxy Rascal and a 5’10″x 18.75 x 2.25″ Al Merrick KSmall. I love the paddle, speed/flow and responsiveness of the Rascal and the KSmall works better with waves that have some shape.

I’m looking for an everyday board

to surf Huntington Beach,

something that rides more like a performance board but has more speed for the average HB days.
Like everybody I’m looking for the balance of speed and maneuverability, I’ve ridden small wave boards that are fast but don’t seem to redirect, turn sharply or fit a wave with some curve (flat tail rocker?, wide nose?, wide tail?) and other grovelers that have a lot of tail rocker and turn great but loses that drive.

So I’m thinking with the stinger along with the vee in the tail will keep it loose/responsive

and the low rocker will keep it fast. So if you think the Greased Pig is the right board for me what dimensions would you suggest? I’m 5’2″, 145 lbs., 25 yrs. experience.
Thanks,
Kent

Hi Kent,

The Greased Pig is the perfect board for you.

I would go 5’7″ -5’8″ x 18 3/4″ x 2 1/4″ single wing swallowtail. The overall rocker is a performance rocker just flattened throughout with lower entry and spiral vee running off the tail.

That gets it into waves quick,

down the line speed bursts,

yet keeps the tail nice and free

with that spiral vee.

So you get a board that basically has the responsiveness of a performance board, yet maintains the essential speed for small wave ripping. It is versatile enough to speed course knee high mushy Huntington as well as shoulder to head high punchy Huntington.
Please feel free to ask any other questions you may have. I know you would be stoked on a Greased Pig. Looking forward to your reply, Aloha,

Todd

Visit the Greased Pig in the Proctor online Board Shop