Hey Todd,

I ordered a custom 6’2 G4-E from you about half a year go or so and I half to say I am greatly impressed…

I have put the board through hell being that I am new to surfing and this was my fist board that wasn’t borrowed..

My surfing has progressed really fast and I have been thinking about getting another board from you for waves chest high and below… I moved to okinawa and I am surfing reef breaks.

I would like a board that can catch

pretty much anything, is loose, and fast.

I learn quick so don’t worry too much about my experience. I remember when I first got my board from you and everyone says dude that board is going to be way to hard for you to learn on and how it would be to fast for me.. The first wave I went for was about waist high and choppy and I caught it..

I fell in love with that board instantly..

Although the board has been through 2-3 foot VA mush to overhead hurricane bill swell in OBX to waist-head high hollow Okinawa reef breaks, I would like to have something a little more loose and fast on the smaller waves..

I also want to try out your polyproxy

construction this time as well.

What do you think about a quad? I wont be ready to order for a couple months but I am serious about getting this board.

I also have a friend who

loves how strong my board is and

how few pressure dings it has in it

and is getting a board from you when I get mine.. All I have is good things to tell people about your board and service.. Thanks allot for jumpstarting my surfing and I look forward to getting new boards from you in the future and spreading your name. Just let me know what you have in mind for me.

Take care,
Vaughn

Hi Vaughn,

Good to hear from you and stoked the board has gone so well for you….and in so many conditions….yew.

So here’s a few choices to choose from as to what I have in mind for the next magic board for smaller, mushier stuff to speed on:

Either the Greased Pig, the Greased Rascal,

The Rascal II or the Falcon….

one of these would be the board for you.

Each of them are made for performance

surfing in the weaker stuff.

They all generate incredible speed without having to rely on the wave to generate it for them. I recommend checking out the website to read a breakdown on each one….from there one of them will strike you as “the one”….that is the one to go with.  As far as dimensions go, what is your current height and weight. I can break down the ideal dimensions once I receive that info. If you have any questions regarding the different boards I listed above, please don’t hesitate to ask so I can give you any further explanation.

Ok, well speak soon,

Aloha,

Todd

http://www.proctorsurf.com/Surf-Boards/worldwide-custom

Bookmark It

Hide Sites

Hey Todd

I was checking out the greased pig on your site.

I was looking for a new everyday board

for waist to head high + .

as far as size I was thinking 5’10” x 19.5” x 2 3/8” .   My only question would be single or double bump in the tail and whether I should go thruster or quad.   If I was going to go with four fins I figured it would work better with the wider tail or single wing.  I dont like four fins on real pulled in tails.

At the same time I wanted something

that will pivot off the bottom and

be able to go vertical

where I’ve rode quads that have trouble doing that. Any suggestions.

Mike

Hi Mike,

Good to hear from you.

The Greased Pig is a great board and one of my favorites.

It jams in small waves and gives you the speed

to do all the turns and maneuvers that you

can’t normally do on a regular board

in those same conditions.

Also, what is very cool is that it is really versatile for a small wave board in that it will surf up to head high + and still run clean.

This board goes quick and loose

(like a quad) already

without the need to loosen it up more as a four fin….I find the tri fin is my favorite since it does more of exactly what you mention…..holds and pivots vertical and lets you lay into it in tight, snappy turns.

I have been having people get them with five fin (boxes) set-up so it can be ridden as a trifin or quad…..and that works really well and gives you the opportunity to enjoy the best of both worlds.  What is your current height and weight, so I can crosscheck that with your suggested dimensions.

The tail is pretty wide already on the

Greased Pig

so I don’t recommend going wider…..

it works great for both tri or quad as it is.

Please feel free to ask any other questions you may have. I know you would be stoked on a magic Greased Pig.

Looking forward to your reply,

Aloha,

Todd

http://www.proctorsurf.com/Surf-Boards/Greased-Pig

Bookmark It

Hide Sites

Todd,
 
I am having trouble deciding on what style of board I  I should buy.

I fall into the category of a beginner for my lack of time

in the water, but I  I feel I  I have the physical ability

to surf at the next level, I  I just need a better understanding of the waves.

I will be spending most of my days in Costa Rica surfing chest to head high beach breaks, mushy slop, and maybe some super long lefts, so having a good all arround board is key. (this will be my first one of course)

I am 23, a short 5’6″ and anywhere in between 155-160.

I am looking for a board that will go down the line quick,

paddle well and be fairly stable.

A 6’0 x 19.5-20″ w, swallow quad was kind of what I  I had in mind (but what do I know). And lastly could you give me the low down on the carbon fiber rail idea I think thats rad.
 
Thanks

Hi Graedy,

The most versatile all-around performance shortboard I make is called the G-4.E. I think this would be the magic board for you. This board generates incredible speed in the small gutless stuff, yet also holds in affording stability and positive drive in the punchier and more powerful waves as well….the best of both worlds type of board I like to call it. It has a single to inset double concave bottom which yields excellent down the line speed.

I recommend going 6’0” x 19 ½” x 2 ½” -

swallowtail quad version works great with this board too…..

what is really popular is the five fin box setup…..then you can ride the board as a thruster/ tri-fin or quad making even more versatile in a wider variety of conditions – sort of like having two boards in one.  These dimensions would be a bit more board than typically someone your height and weight would ride, but these dims will be good for you to afford you the extra paddle-ability and stability necessary for where you are at with your surfing currently. But know also that this design will challenge you, but without frustrating you; and will

allow you to progress into the performance realm

of surfing without the need to switch to a

different board as you progress.

The carbon rails is a very durable and high performance design feature of the construction of the board. They are an upgrade and done only with the Proxy construction; which is my custom epoxy construction. The Proxy is 3-5 times stronger that standard foam and fiberglass and has a flex pattern that adds incredible performance to the board. This is where the carbon rails also come into play.

By eliminating a center stringer and strengthening the

rail structure of the board, the board has a

very lively flex characteristic that makes it feel

like it is slingshotting through turns.

I have great results with this upgrade option.

Ok, well hope that was able to answer some of your questions. Please feel free to ask any other questions you may have. I know you would be stoked on a magic Proctor. Looking forward to your reply,
Aloha,

Todd

Todd

Thanks for all the info…..What would this ride like if we went a bit shorter lets say 5’10-5’11″, and a bit wider like 20-20.5? If this is even possible. When I started to look for surfboards I was chasing around the fat round fish idea (not sure why) but I think if we can put a swallow and a boxed five fin this would turn out good. Can you swallow a 5 fin?..i think I would ride it as a quad (they are supposed to be more stable correct?) I know that once I get to surf on a regular basis I will be improving fairly fast so a board that has room for improvement is key… I am not very familiar with the different types of boards, aka foam,epoxy,proxy….(those carbon rails look so sick!!) All I know is being that I am fairly new to the sport I will eat sh*t lots and

I am gonna need a board that will take a fair amount of punishment…..

Last but not least I am gonna need some prices on this magic board.
I quickly looked thru your artwork and there so many I can’t decide…what is the difference in price between the airbrush, spraycan, paintpen??

Thanks again for all your help,
Graedy

Hi Graedy,

I answered your questions below in blue…

Todd
Thanks for all the info…..What would this ride like if we went a bit shorter lets say 5’8″, and a bit wider like 20-20.5?

As from your last e-mail, I think we could go 5’11” – 6’0” x 20” x 2 ½” for the dimensions….and as for the design, I think we could actually go with a bit of a compromise between a standard performance board and a fuller outlined board (like you mentioned regarding a round nose fish sort of design). Well, I have a little board I’ve been doing for the last year or so that is absolutely amazing….it is called the Falcon. The Falcon is super fast like fish, but it has the performance, responsiveness and holding capacities of a high performance shortboard design. It paddles like a champ and flies in small waves, yet also goes mental in good waves….so it’s range is from two foot and mushy to overhead.

If this is even possible. When i started to look for surfboards i was chasing arround the fat round fish idea (not sure why) but i think if we can put a swallow and a boxed five fin this would turn out good. Can you swallow a 5 fin?..i think i would ride it as a quad (they are supposed to be more stable correct?) I know that once i get to surf on a regular baisis i will be improving fairly fast so a board that has room for improvement is key…

the Falcon will match where you are at now, yet will bring out a new performance realm in your surfing also….this design is a favorite across the board from professional surfers to novice.

I am not very familliar with the different types of boards, aka foam,epoxy,proxy….(thoes carbon rails look so sick!!)All i know is bieng that iam fairly new to the sport i will eat sh*t lots and iam gonna need a board that will take a fair amount of punishment….. Last but not least iam gonna need some prices on this magic board.

These two go hand in hand…..the traditional foam and fiberglass boards (polyester construction) are $605.00. The five fin upgrade is an additional $45.00. The Proxy construction is $750.00….and the five fin upgrade is additional $45.00. The Proxy is the premier board I make for both strength and performance (they last approximately 3-5 times longer/ stronger than traditional polyester construction). The carbon rails work insane also as I explained to you in my previous e-mail….the carbon rails are an additional cost of $100.00 since carbon is a high grade composite and the fabrication process on the board is timeconsuming….but it is definitely worth it.

I quickly looked thru your artwork and there so many i cant decide…what is the difference i price between the airbrush,spraycan,paintpen??

The price varies anywhere from $65.00 to $250.00 on the airbrushes and rattlecan art depending upon what you want. You can check out the different ones and let me know which number you like and I’ll get you a price for it. The rattlecan sprays run between $65.00 – $85.00. Please keep in mind the artwork up on the site is just there to give you some ideas of what we have done and are capable of doing, but it is not limited to what you see there. Basically we can do anything you can think up, but we can’t quote you until we understand what it is you would like.

Ok bro, well please feel free to ask any other questions you may have. I know you would be stoked on a custom Proctor Falcon Proxy with carbon rails. Looking forward to your reply,

Aloha,
Todd

Visit the G-4.E page to find out more about this board model

Bookmark It

Hide Sites

Hey mate,

just wanted to tell you that your boards look amazing,

plus your tech is further ahead of anything

we have here

(Australia, if you’re wondering!)

I’m just curious about the kevlar sheeting in your proxy construction… I know that kevlar is very strong, but how do you prevent the UV degradation? Surely the kevlar by itself would slowly decompose over time in the sun…

Hope you get back to me, I’m really interested in getting one of your proxy G-4.E models!

Regards, Harry

Hi Harry,

Sorry to not get back with you sooner….things have been very busy here…

Anyway, thank you for your e-mail. The Kevlar does “tan”/ change color as exposed to the sun over time, but as far as the amount of sunlight/ degradation is concerned with the boards, the strength is not minimized over time. I have many boards that have been surfed in places like Tahiti, Hawaii, even Australia actually where the Kevlar goes to a darker olive drab color from the bright yellow color, but

they hold up incredibly even for as long as

three years some of these boards are still

going strong maintaining their flex memory/

spring….and this is under regular use

over a long period of time.

The Kevlar sheet is also encapsulated between two sandwich layers of glass that has a resin utilizing a uv stabilizing agent….so this may add to the filtering of the damaging effects of sunlight.

Hope that answers your question. Please feel free to ask any other questions you may have. I know you would be stoked on a magic G-4.e. This is the most versatile high performance shortboard I make. If you let me know your height, weight, experience, age and the type of waves you surf, I will detail the magic design and dimensions for a custom G-4.e for you.

Looking forward to your reply,

Aloha,

Todd

CLICK HERE TO VISIT CUSTOM-EPOXY-SURFBOARDS.COM AND TO READ A DETAILED BREAKDOWN OF TODD PROCTOR’S UNIQUE PROXY EPOXY TITANIUM SURFBOARD SERIES

Bookmark It

Hide Sites

todd,

hope everything’s going well.

i want to make some changes to the proxy accelerator

you made for me some time ago.

i love the board, but i feel with some tweaks here and there it’ll be just right.  the dims on the one i have are 5’11.5 x 11.5 x 18.5 x 14.25 x 2-3/16 with an outline back (slight bump wing squash tail).  the overall volume feels right and i would leave the rails and foil exactly the same, but

i feel like i can go a bit shorter and a bit less area

between the feet (i tend to be a little

more front footed than back).

i’m thinking of going with a standard outline (no bump wing in the tail), a little more squared squash tail and one of the following dims:
 
5’11 x 11.5 x 18-9/16 x 14.25 x 2-3/16
5’10.5 x 11.5 x 18-5/8 x 14.25 x 2-3/16

have you tried using a single to double concave bottom

instead on this board?

just curious how it would perform against the single concave all the way through.  
 
peace,
 
mauricio

Hey Mauricio,

Good to hear from you….how was your Memorial Day weekend? Charissa and I got a nice respite.

I like your idea for the tweaks on the Accelerator.

I think the 5’10.5” would be the one, especially since summer is here….the less length the better. I like the idea of no bump with the the more squared up squash too.

I haven’t tried a single to double on this board,

but I’ve thought about it and have actually been

mulling it around in my mind for a few months,

but just haven’t gotten around to it….

so I think we should do that too.

From the sounds of it, this design would fun fast and clean rail to rail arcing/ carving king of small wave surfing…..

the single to double would probably open up the sweet spot

so it drove off both feet more as opposed to

having all the gas pedal just under the back foot….

and the doubles make a board drive real positive on rail engaging the concave on the side of the board that is involved in the turn more than a single will.
Basically I’m down with all your ideas….and have already been wanting to do a board like this….you can be the test pilot.
Let me know any other thought or questions you may have. Looking forward to your reply,
Aloha and peace to you too bro,

Todd

thanks for your feedback!

i feel like the single concave works well for a linear style surfing suited for fast down the line point breaks where you’re trying to always keep up with the speed of the wave.

i wish we had at least an inkling of a point break

in florida, but nada amigo.

unless i’m going to point break surfing heaven soon, the majority of my lifetime will be spent surfing peaky closeout beachbreaks that suits a quicker top to bottom style of surfing where you’re trying to work in as many turns as possible.

maybe this board with double concaves

(deeper than the G4E and SR71)

would still have enough down the line speed

when driven off both feet,

but will help to maintain momentum a little better

through all those turns.

let me know when would be a good time to call and discuss.  thanks Todd!

mauricio

Final Call:

Custom Proxy Epoxy Titanium Series Parabolic Accelerator (modified):  5’10 1/2″ x 18 5/8″ x 2 3/16″ square/squash no hip

Bookmark It

Hide Sites

Hi Todd,

A few words to tell you how much I love the boards you made for me.
Time is going and I’m thinking of a new order for the end of summer.
So I would like to get your suggestions for 3 or 4 more new boards:

1- Going to the Mentawais in October so i’m thinking of

SR 71 or Ante up in 6’8 ( 19 3/8? 2 1/2?)
Proxy + carbon hinged flex tail?

Good dimensions….maybe could go 19 ¼” width….I recommend Ante-up…are you wanting to drop the thickness a bit on these boards as to previous one’s? Do you want to drop the rail volume also just a bit. You can get away with lower rail volume for boards for Indo since the waves are so perfect and have good push to them. I recommend round pin.

2- My favorite board is that first Proxy Lil’ Rascal you made for me

in 6’1 x 20 3/4 x 2 9/16.

She’s getting old now and I’m thinking of a new one.
Should i get the same?

That is a good solid board…I would stick with the same dimensions for sure if that one is feeling that good…
Should i try that new Lill Spuddy?Same size?

Yea, I would go with the same dimensions with the round tail/ Lil’ Spuddy model.
What is the difference between them or with the Greased Rascal?

The Greased Rascal you ride a bit longer and narrower than the original Rascals, and it has the bottom and rocker of the Greased Pig, so it is a little bit more favored to small waves with shape and will surf in bigger waves also and still ride clean. It is a great board too, but similar to the Greased Pig….so I would go with your original Rascal dimensions in round tail Lil’ Spuddy model.

3-Looking for an all around Proxy Titanium series

in 6’4 (19 1/2? 2 1/2?).

G4E? Blackbird? Accelerator? Something else?

I would go with the G-4….I have a really good design file in 6’4”. This one also has the thinner volume I noticed….do you feel like you can go a bit thinner on your boards for good waves? As you progress, typically you can start riding boards that have less volume; you just don’t want to sacrifice too much paddling, but I think you could go thinner on this batch of boards especially since they are for Indo style waves.
The Blackbird is a good one too, but it favors being ridden off the back foot. The tail and fins like to release in the lip on this board, so if that is what sounds good to you then this would be a good one to run with.
The Accelerator is a bit more of a Grovel style smaller wave board and for marginal conditions ( I have been riding mine a lot lately actually), so I don’t know that it is going to be a board that is your best bet for Indo….maybe for another order or for waves at home.
Dimensions for each of these I think you could go: 6’4” x 19 ¼” x 2 ½” rounded squash for the G-4 or Blackbird, and squash, round tail or swallowtail for the Accelerator.

4-I’m surfing 50% of the time my new Greased Pig with carbon rails.

So i’m thinking of an other one 6’4? 19 5/8? 2 9/16?

Good dimensions….can’t go wrong with the parabolics and the channels work insane of this board….been making quite a few of them lately…

Proxy,Parabolic stringer + 6 channels?

Please let me know what you think about this.I’m in total confidence with your suggestions.

Let me know your current weight because I think we can drop the volume of your boards just a bit….keeping the paddle, but gaining a bit more responsiveness and performance by making the overall volume and rail volume just a bit more sensitive…..let me know what you think of this too…? I also have a new construction method where the boards are super light….they are not quite as strong as with the 6oz. like we have been doing, but they are still amazingly strong, but very very light….so if you are interested in going a little bit lighter weight I am now offering a construction series for this also. If you are happy with the strength, weight, and performance on your boards now, then I would just stick with what has been working….maybe just try one of two of the new smaller boards with the super lightweight glassing constructiong….
Please feel free to ask any other questions you may have. I know you would be stoked on some magic Indo carpets.
Looking forward to your reply,

Todd

Best,
Vincent

Hi Todd,

nice to get your suggestions.

My current weight is 150lbs and i’m 45 years old.

I think i can go a bit thinner on my boards so i will follow you to drop the volume a bit but without missing the paddle too much.

Yes, I think we can go thinner without sacrificing paddle, but gaining performance.

My order would be:

1 Ante up 6’8/ 19 1/4 / 2 1/2

with lower rail volume,rounded pin
Proxy,carbon hinged flex tail …

do you want the futures or f.c.s. fin system for this board, and what color for the spray fade (two-tone light grey looks good or two tone light blue fade with the carbon hinge.

2 Lil’ Spuddy proxy. Stringerless with carbon rails?

I’m ready to try it smaller and thinner (6’0? 20 1/2 ?) if you want.

New dimensions sound good….do you want to go with tri fin or five fin setup? What color for the fade, and what fin system?

3 G 4E 6’4 x 19 1/4 x 2 1/2 rounded squash.

Proxy,construction?(Titanium upgrade?Parabolic?New super light glassing construction?)

I think super light glass with titanium parabolic would be sick for this one…..and in the two-tone light gray fade for the color with futures or f.c.s.?

4 Greased pig 6’4 /19 5/8/ 2 9 /16

Proxy,parabolic stringer,6 channels
super light glasing construction;

super light glassing is good with channels and parabolics….nice….two tone light blue would look nice to easily differentiate between the other greased pig. Do you want  f.c.s. or futures…..tri fin or five fin?

Does it sounds good to you?
When do yo think i should order the boards to be sure to get them in september?July?

It is getting very busy right now, so I think probably the sooner the better….at the very latest by July, better by end of May or June for me personally…..so I can take the time to do exceptional job…..I’m very excited about these new dimensions for you…..I think these boards are going to be your biggest progression in your surfing.
Please feel free to ask any other questions you may have.
Looking forward to your reply,
aloha, Todd

Best,
Vincent

Hi Todd

I will put my order by the end of may.

For each board I’m ready to drop the volume a bit to

gain peformance without sacrificing paddle.

I would like 4 new boards from you:

1- Ante Up 6’8 x 19 1/4 x 2 1/2 rounded pin Proxy,carbon hinged flex tail

Futures fins ,full camo green with no fade.
I will bring it with me to the Mentawais at the end of the year.

2- Lil’ Spuddy 6’1 x 20 1/2 x 2 9/16 stringerless with carbon rails,

fin setup,Futures fins,camo green spray.

3-Greased pig 6’4 x 19 5/8 x 2 9/16 Proxy,parabolic stringer,

6 channels,super light glassing

Full camo green,no fade.3 fin setup.
Futures fins if possible with the channels,if not FCS.

4-For the last board i think i will take another four leaf clover

because i love soo much this board.

What would you say of:

4 leaf clover  6’4 / 19 3/4 / 2 9/16 diamond tail super light glass with titanium parabolic in the two tone light gray fade
Future fins with AM2?

Please give me your advice for this final order.Do you think i should change anything?
If it’s OK for you could Charissa send me an advice around the end of May for Paypal payment?

Best,
Vincent

Bookmark It

Hide Sites

Hi Todd,

My name is Michael and I need advice on what board to get.  I’ve never owned a board and I want to make the right choice.

I’m 15, 5′ 9 1/2″ tall and 140 lbs.

I would consider myself intermediate.

I surf a very small amount because I live in

Keene NH (look it up) but I also

snowboard and longboard extensively.

I mostly surf mushy New England waves but I get the chance to go to cali fairly often because I have relatives there. I’m looking for an board that will do what I want it to when I want it to no questions asked.

I was thinking the greased pig would be a good choice.

Please give my any advice you have.

Michael

Hi Michael,

The Greased Pig would be a perfect board

for the small mushy waves where you live,

but it is also very versatile and will

surf fast and responsive in anything

up to slightly overhead as well….

so it goes great in Cali waves too.

The ideal Greased Pig dimensions for you are: 5’10” x 19” x 2 ¼” with a single wing swallowtail.

Please feel free to ask any other questions you may have. I know you would be stoked on a magic Proctor Greased Pig. Looking forward to your reply,

Aloha,

Todd

Bookmark It

Hide Sites

First Name: david

Age: 44

Height: 5’9″

Weight:  192 lb

Experience:  31 years

Type of board you’re interested in:  rascal II

Type of waves you will be surfing with this board

waist to head high mush to steep point/beach breaks

The direction you want to go with your surfing

more airs and freer turning and carry more speed through turns

What boards are you currently riding?

PU 6’0″x20′x2.5″ channel island Pod, PU 5’11″x20x2.5 Simon Anderson TPF3, 6’4″x19.5″x2.5″ Channel Island Flyer Epoxy.

Anything else you want Todd to know

I grew up surfing Malibu and Ventura county line and topanga but live overseas now so an email would be greatly appreciated on your recommendations of dimensions for a rascal II board order, thanks lots!! David LIu

Hi David,

Nice to meet you…

the magic Rascal II for you is going to be

5’10” x 20 1/8” x 2 ½” with a full boxy rail…..

this is the fastest high performance board I make…..

I know you would be stoked!!:) Please feel free to ask any other questions you may have.

Looking forward to your reply,

Aloha,

Todd

Hi Todd,

Thanks so much for you quickly reply, the dimensions look great. Could you please tell me how much it would cost and how long it would take and whether I can have it delivered overseas or in the States only, thanks very much again for your help.
David

Hi David,

The Rascal is $585 for a polyester and $735 for the Proxy custom Flexible Epoxy construction. Both of these constructions have various performance and durability enhancing upgrades available as well. Our turnaround time right now is about 3-6 weeks, depending on how quickly you would like to get the board. We ship direct worldwide. If you would like a shipping quote, please provide your full shipping address and we’ll let you know what the cost would be.

Please feel free to ask any other questions you may have.

Bookmark It

Hide Sites

First Name:  donis

Age:  24

Height:  175cm

Weight:  74kg

Experience:  8 years

Type of board you’re interested in:

i`m looking some thing to hold in well in biger waves like 2 over had, to hold well,but be good and on smaller stuff,and be nice and loose when it need and stronger then normal board.

Type of waves you will be surfing with this board:

i`m traveling alot so all kined a waves from knee height to 2 over had.bareling..

The direction you want to go with your surfing:

i`m surfing every day so i wanna go far…:)

What boards are you currently riding?

las 2 boards.js fly boy.6`2 18`1/4 21/8 squash.
jc rg-4 5`11 18`75 2`25 swllow.

Anything else you want Todd to know

i`m from uk so if you can ofer some good board i will by it.
i was thinking about tokoro resin8 6’0 1/2″ 18 3/8″ by 2 1/4″ Round Pin. let me know what you think. thank you for your time.

Hi Donis,

The most versatile performance shortboard I make is the G-4.e.

This board generates incredible speed

in small waves, yet holds in and surfs fast

and responsive in the pocket on the

more powerful and hollower days up to overhead.

The ideal dimensions for you would be 6’0” x 18 3/8” x 2 ¼” rounded squashtail or thumbtail.

I do several different constructions types, but I think you would be

most stoked on the Proxy custom

flexible epoxy

technology…..this has the same flex pattern and

feeling under your feet as an ultralight poly board,

but with three to five times the strength of a

standard poly board.

It differs from the Resin 8 boards in that the Proxy still runs very clean even in bumpy or textured conditions where the Resin 8 boards tend to like the perfectly glassy days, but become very popcorny/ on top of the water bouncy feeling and temperamental in any bit of textured conditions or offshore winds….they also tend to suck in water when dinged which the Proxy does not have that extreme water absorption issue like the Resin 8.

Please feel free to ask any other questions you may have. I know you would be stoked on a magic Proctor G-4.e Proxy. Looking forward to your reply,

Aloha,

Todd

Bookmark It

Hide Sites